CẢM BIẾN ĐO BỤI S203

Kính chào quý khách đến với website của chúng tôi !

sale11@tmpvietnam.com

danh mục sản phẩm

hỗ trợ tư vấn

0917 543 068

THỐNG KÊ TRUY CẬP

Đang online: 3

Truy cập ngày: 66

Truy cập tuần: 529

Truy cập tháng: 1383

Tổng truy cập: 128335

liên kết website

Sản phẩm

CẢM BIẾN ĐO BỤI S203 | SINTROL VIETNAM
Mã sản phẩm : CẢM BIẾN ĐO BỤI S203 | SINTROL VIETNAM

Xuất xứ: PHẦN LAN

Email: sale11@tmpvietnam.com

Mô tả: Đại lý phân phối hãng SINTROL tại Việt Nam

Tình trạng: Mới 100%

Giá: Liên hệ

Thông Tin Sản Phẩm
Đánh Giá

CẢM BIẾN ĐO BỤI S203

Trend monitor with 4-20 mA output for continuous dust measurement

Continuous trend monitor that gives plant operators to see the performance of the filtration systems and ducts over a period of time. Perfect for installation after any filtration system or in common line channels leading into the emissions points of a plant.

State of the art Inductive Electrification principle minimizes the need for maintenance on the dust monitor and provides an accurate trend for end users. 4-20 mA output combined with an easy-to-use auto-setup feature that takes less than 30 minutes from installation makes the device both convenient and reliable.

Features

Good value for money
Easy start-up and commissioning
Rugged design for harsh industrial conditions
Proven technology
Accurate dust measurement

Extremely wide measurement range
Normalized (instruments are all identical) instrument with a detection limit of 0.01 mg/m³

* Bảng vẽ:

* Thông số kỹ thuật:

Product Name	S201 PC901013 \| S201 Ex PC901014 \| S203 PC901012 \| S203 Ex PC901024
Measurement objects	Total Suspended Particles (TSP)
Measurement range	Detection Limit 0.01 mg/m³ Maximum Range up to several g/m³, depending on conditions
Measurement principle	Inductive Electrification
Protection code	IP66
Power supply requirements	24 V DC ±10 % 100 ... 240 V AC ±10%, 50 / 60 Hz
Power consumption	Up to 10 W DC / AC
Output signals	2 × Independent SPDT dry contact relays, max. 30 V DC / 5 A or 240 V AC / 5 A, cos φ = 1 Isolated active 4 ... 20 mA output loop*, max. loop resistance 250 Ω
Communication interface	Serial communication RS-485 USB
Communication protocol	Modbus RTU (RS-485) Sintrol network (USB, RF and RS-485)
Ambient Conditions
Temperature	−40 ... 60 °C (−40 ... 140 °F) / -30 ... 60 °C for Ex models
Humidity	Max. 95 % relative humidity (non-condensing)
Materials and Weight
Enclosure / casing	Aluminum
Weight	1.5 kg (3.3 lbs)
Process conditions
Temperature	Max. 300 °C (572 °F), optionally up to 700 °C (1292 °F) Max. 250 °C (482 °F) with Teflon-coated probe Max 200 °C for Ex models
Pressure	Max. 600 kPa (87.02 psi) in temperatures up to 300 °C (572 °F) Max. 300 kPa (43.51 psi) in temperatures from 300 °C (572 °F) to 700 °C (1292 °F) when high-temperature process connection is used
Hazardous location approvals Applicable to Ex models	IECEx/ATEX: II 2 D Ex ia/tb IIIC T200 93°C...201°C Da/Db -30°C < Ta < +60°C US: Zone 20 A Ex ia ta IIIC T85°C...T201°C Da CAN: Ex ia ta IIIC T85°C...T201°C Da US/CAN: CL II, DV 1, GP E, F, G. IS Probe Ta= -30°C to +60°C