- Kiepe Việt Nam
- Festo Việt Nam
- Pavone Sistemi Việt Nam
- Met One Việt Nam
- Qualitest Việt Nam
- Intorq Việt Nam
- Omega Việt Nam
- Spohn & Burkhardt Việt Nam
- Pressure-tech Việt Nam
- Vega Việt Nam
- Fluoroline Việt Nam
- Okazaki Việt Nam
- Bircher Việt Nam
- Tempsens Việt Nam
- Burkert Việt Nam
- Orbinox Việt Nam
- Knick Việt Nam
- Minimax Việt Nam
- Gemu Việt Nam
- Kometer Việt Nam
- Cs Instruments Việt Nam
- Gunther Việt Nam
- Teclock Việt Nam
- Ashcroft Việt Nam
- Koganei Việt Nam
- DMN-Westinghouse
- Sinchold Việt Nam
- Sintrol Việt Nam
- ELAU SCHNEIDER VIỆT NAM
- DAIICHI ELECTRONICS VIỆT NAM
- DEUBLIN VIỆT NAM
- CELEM VIỆT NAM
- BAUMULLER VIỆT NAM
- BEIJER ELECTRONICS
- BROOKS IN STRUMENT
- Bircher Việt Nam
- AT2E Việt Nam
- Gastron Việt Nam
- Tek-trol Việt Nam
- Dwyer Việt Nam
- Okura Việt Nam
- Redlion Việt Nam
- TDK - Lambda Việt Nam
- Mark-10 Việt Nam
- Matsushima Việt Nam
- SCHENCKPROCESS
- CEMB
- FRIGORTEC
- D-hydro Việt Nam
- NETTER VIBRATION VIỆT NAM
- Tecfluid Việt Nam
CẢM BIẾN ĐO BỤI E-SPY | SINTROL VietNam
Mã sản phẩm : CẢM BIẾN ĐO BỤI E-SPY | SINTROL VietNam
Xuất xứ: PHẦN LAN
Email: sale11@tmpvietnam.com
Mô tả: Đại lý phân phối hãng SINTROL tại Việt Nam
Tình trạng: Mới 100%
Giá: Liên hệ
-
- Thông Tin Sản Phẩm
- Đánh Giá
CẢM BIẾN ĐO BỤI E-SPY | Sintrol VietNam
E-Spy is a revolutionary process monitor that helps optimize the performance of an ESP using state-ofthe art probe based technology. Recently developed by our engineers and valuated by research institutes here in Finland, our monitors continuously track the particulate measurements downstream from the ESP enabling plants to not only adhere to the strictest emission regulations, but also reduce overall energy costs. With hundreds of installations worldwide, this has become our fastest growing process control device since it both outperforms and is much more cost effective than the alternative optical monitors.
Hundreds of E-Spy have now been installed, and customers are proving to be very satisfied. An increasing number of dust monitors are now being replaced by the Sintrol E-Spy because it is inexpensive, easy to install and commission, requires hardly any maintenance and gives a reliable measurement signal.
The ESP operator can adjust the parameters to minimize the ESP maintenance requirements, operating costs and the expenses from dust emissions, while meeting all regulatory requirements.
* E-Spy: The Revolutionary Alternative
E-Spy brings an alternative ESP control solution to the previous high cost / high maintenance options. By using this new dust monitor, the operator can:
• Constantly optimize the operating parameters of the ESP; no measurement down time
• Judge the performance of the ESP based on output signal; identify maintenance needs
• Simplify the optimization of the rapping system; decrease energy costs and emissions
• Save on operating costs - ESPs can be run with the lowest possible energy consumption while still complying with authority requirements
Industrial Applications
● Power/electricity generation
● Cement industry
● Chemicals industry
● Metals industry
● Paper indust
* Bảng vẽ:
* Thông số kỹ thuật:
Product Name |
E-Spy with S303 |
Measured objects |
Total Suspended Particles (TSP) |
Measurement principle |
Inductive Electrification |
Measurement range |
Detection Limit 0,01 mg/m3 Maximum Range up to several g/m3, depending on operating conditions |
Ingress protection |
IP66 |
Power supply requirements |
24 V DC ±10% 1 100 ... 240 V AC ±10%, 50 / 60 Hz |
Power consumption |
Up to 10 W DC / AC |
Output signals |
|
Communication interface |
|
Communication protocol |
Modbus RTU (with RS-485) • Sintrol network (with USB, RF and RS-485) |
Physical characteristics |
|
Enclosure |
Aluminium |
Wetted parts |
Probe: Stainless steel (316L) • Insulation: Polyphenylene sulfide (Ryton R-4) |
Weight |
from 5,7 kg to 7,5 kg |
Ambient conditions |
|
Temperature |
-40 ... 60 °C (−40 ... 140 °F) / -30 ... 60 °C for Ex models |
Humidity |
Max. 95 % relative humidity (non-condensing) |
Process conditions |
|
Temperature |
|
Pressure |
|
Flow velocity |
Min. 3 m/s (9.84 ft/s), max. tested 40 m/s (131.23 ft/s) |
Wireless communication* |
|
Frequency bands |
|
Transmit power |
Up to +23 dBm, user-adjustable |
Receiver sensitivity |
-110 dBm |
Communication protoco |
Proprietary Sintrol Network protocol |
Typical communication range (non-line of sight) |
• 868 MHz version • Up to 1000 m (3280 ft) in urban environments** |
* Requires optional RF antenna.
** Surrounding structures and other devices using radio frequencies can have significant effect on RF communication range.
* CATALOG: