THIẾT BỊ ĐO ĐỘ DÀY SM-114 | TECLOCK VIỆT NAM

THIẾT BỊ ĐO ĐỘ DÀY SM-114 TECLOCK VIỆT NAM

Measuring the thickness of the paper, small parts or film, easily by sandwiching

Compared to the dial gauge for use in mounting the fixture, thickness gauge is held by hand, sandwiched workpiece between the gauge head and the anvil, reads the value directly. The probe is raised by pushing down the lifting lever, it will return to the original zero point by releasing the lever. Since the operation is simple, even compared such as a micro-meter, it can be measured in a short period of time.

In both analog and digital, there area two types of scale, 0.01mm and 0.001mm, and stroke models are up to a maximum thickness of 50mm depending on the size of the work. It can be used in a wide range of applications for small molded parts such as paper, hair, rubber plate and metal tube.

Đặt trưng 

• Suitable for measuring thickness and diameter of metal, lens, rubber, plastic, paper, felt, hair, pearl etc. in actual dimension.
• Ceramic contact point and anvil feature are superior for anti-abrasion and rust. In addition, there are steel FE type and AT type which rarely adheres with adhesion tape.
• As to shape of contact point and anvil, there are standard type and other various kinds.
• Measuring force of standard type is not more than 2.5N as final pressure, low measuring force type of which final pressure is about 0.4N (about 40gf) is also available.

Bảng vẽ 

Thông số kỹ thuật 

CATALOG