- Kiepe Việt Nam
- Festo Việt Nam
- Pavone Sistemi Việt Nam
- Met One Việt Nam
- Qualitest Việt Nam
- Intorq Việt Nam
- Omega Việt Nam
- Spohn & Burkhardt Việt Nam
- Pressure-tech Việt Nam
- Vega Việt Nam
- Fluoroline Việt Nam
- Okazaki Việt Nam
- Bircher Việt Nam
- Tempsens Việt Nam
- Burkert Việt Nam
- Orbinox Việt Nam
- Knick Việt Nam
- Minimax Việt Nam
- Gemu Việt Nam
- Kometer Việt Nam
- Cs Instruments Việt Nam
- Gunther Việt Nam
- Teclock Việt Nam
- Ashcroft Việt Nam
- Koganei Việt Nam
- DMN-Westinghouse
- Sinchold Việt Nam
- Sintrol Việt Nam
- ELAU SCHNEIDER VIỆT NAM
- DAIICHI ELECTRONICS VIỆT NAM
- DEUBLIN VIỆT NAM
- CELEM VIỆT NAM
- BAUMULLER VIỆT NAM
- BEIJER ELECTRONICS
- BROOKS IN STRUMENT
- Bircher Việt Nam
- AT2E Việt Nam
- Gastron Việt Nam
- Tek-trol Việt Nam
- Dwyer Việt Nam
- Okura Việt Nam
- Redlion Việt Nam
- TDK - Lambda Việt Nam
- Mark-10 Việt Nam
- Matsushima Việt Nam
- SCHENCKPROCESS
- CEMB
- FRIGORTEC
- D-hydro Việt Nam
- NETTER VIBRATION VIỆT NAM
- Tecfluid Việt Nam
ĐỒNG HỒ ĐO LƯU LƯỢNG TEK-FLUX 1400A SERIES
Mã sản phẩm : ĐỒNG HỒ ĐO LƯU LƯỢNG TEK-FLUX 1400A SERIES
Xuất xứ: USA
Email: sale11@tmpvietnam.com
Mô tả: Đại lý phân phối hãng TEK-TROL tại Việt Nam
Tình trạng: Mới 100%
Giá: Liên hệ: 0889952257
-
- Thông Tin Sản Phẩm
- Đánh Giá
ĐỒNG HỒ ĐO LƯU LƯỢNG TEK-FLUX 1400A SERIES
Đồng hồ đo lưu lượng điện từ Tek-Flux 1400A, còn được gọi là Magmeters, nó là một dụng cụ tiếp xúc được sử dụng để đo lưu lượng thể tích của bất kỳ chất lỏng nào có thể dẫn điện đầy đủ trong các đường ống kín. Những thiết bị này là những thiết bị có độ chính xác cao, đáng tin cậy và ổn định được sử dụng trong các quy trình công nghiệp áp suất cao khác nhau. Đồng hồ đo lưu lượng Tek-Flux 1400A hoạt động trên cơ sở Định luật cảm ứng Faraday.
Theo nguyên tắc này, bất kỳ sự thay đổi nào trong từ thông liên kết với mạch điện đều gây ra suất điện động (hoặc hiệu điện thế) gây ra trong mạch này. Do đó hiệu điện thế cảm ứng tỷ lệ thuận với tốc độ thay đổi của từ thông theo thời gian. Nó có thể đo các môi trường có tính ăn mòn cao như axit đậm đặc và kiềm đậm đặc bằng cách sử dụng vật liệu lót PTFE. Bằng cách sử dụng điện cực Titanium.
* Đặt trưng:
- Wide range of nominal diameter Size ½” to 28″ (0.04 ft to 2.33 ft) with IP65 protection.
- Easy maintenance due to no moving parts.
- Uninfluenced by temperature, pressure, viscosity, and density.
- Used for wide application, can measure conductive fluid, without reference to fibre, solid or suspending material contained in liquid.
- High turndown ratio up to 1:100.
- It features high intelligence, with back light LCD display, menu setting control, three grades password protection, two-way measuring, slight signal removal, auto flow compensation, and other function.
- Features high intelligence, which ensure empty pipe detection, self-detection, self-diagnostic functions, and safety alarms for upper and lower limit.
- Features SMART excitation, which ensures zero-point stability, high reliability, and low power consumption.
- Lining and electrode available in various materials which can measure nearly all conductive fluids.
- It has multiple signal output, pulse or Modbus RS485 or HART® or 4 to 20 mA.
- The power supply system has good voltage vibration ability.
- Meters batching and blending totalization.
* Thông số kỹ thuật:
Accuracy |
±0.5%, ±0.3% Optional |
||
Repeatability |
0.15% |
||
Ambient Temperature |
Sensor (Remote Type) |
-4 °F to 158 °F (-20 °C to +70 °C) |
|
Converter |
-4 °F to 158 °F (-20 °C to +70 °C) |
||
Integral Type |
14 °F to 122 °F (-10 °C to +50 °C) |
||
Humidity |
5% to 95% RH (no frost) |
||
Vibration Frequency |
55Hz |
||
Amplitude |
0.55mm |
||
Ambient Magnetic Field |
≤400A/m |
||
Fluid Temperature |
Direct Mount |
≤176°F (80°C) |
|
Separate Type |
Rubber Lining |
≤176°F (80°C) |
|
PTFE Lining |
≤248°F (120°C) |
||
Nominal Pressure |
Limited to Flange Rating |
||
Power Supply |
18 to 36VDC, 85 to 220VAC |
||
Enclosure |
IP65 |
||
Output Signal |
Pulse and 4 to 20 mA |
||
Digital Communication |
Modbus, RS485 or HART |
||
Electrode Material |
316SS or Hastelloy C and Specials |
||
Lining Material |
PTFE or Hard Rubber |
||
Flange Material |
Carbon Steel, Stainless Steel and Specials |
||
Measuring Tube Material |
Stainless Steel, Hastelloy C and Specials |